CHOC-0-BENDA

 

#64 "Choc-0-Benda"

Bunnynose Guitars paint & finish on a high quality WD alder body.
Custom Bunnynose cow pickguard

The neck is from USA Custom Guitars. It's a birdseye maple shaft with an ebony fretboard.
9.5" radius Clay dots, ‘54 Contour. It's a “C” shape about .85 at the first fret
then a soft v from about the nut to third or fifth fret. It's a 22 fret neck with 6105 wire.
There had been a crack, not a break, in the headstock. It has been repaired.
It’s stronger now than it was before.

The pickups are Lindy Fralin Blues Specials.
Hear the Blues Specials here.

The hardware is all Glendale. Glendale raw deal vintage bridge,
“Twang” saddles, neck plate, control plate, knobs, switch tip, “Twang” ferrules and jack cup.
Callaham string tree, bone nut & strap knobs
The Tonepros Kluson deluxe machines are the best.
The b-bender was built/installed by Bill Bores.

For electronics, she's got a CRL 3-way switch, CTS 450G Series 250K Vintage
Dish Back Pots with solid shafts. Audio Taper - 10% Tolerance; .047uf/200v - 196P Sprague
Vitamin Q - New Old Stock - Paper in Oil cap. Cloth pushback wire.
The strings are Ernie Ball .010s

Listen to Choc-0-Benda played by bluesman Robert Mearns HERE.
Guitar was plugged into a '66 Fender Champ with an 8" AlNiCo
speaker at sound level 4.

You're sure welcome to stop on by and try her out if you're
in the Santa Monica, CA area four days a week by appointment.

 

$2200 plus shipping.

 

 

HOME

 

 

 

 

CONTACT ME DIRECTLY TO GET YOUR LOWEST PRICE.